COMMERCIAL & INDUSTRIAL CLEANING SUPPLIES

Share:


RABBIT FLOOR BLOWER - FB-350

RABBIT FLOOR BLOWER - FB-350
*Use for cooling air, ventilating and hot air drying in offices, conference rooms or other public areas.
*Ideal for drying floor, carpet, mat, fabric, wall and provides high efficiency.

PRODUCT CODE : CLS-V-FB-350

Specification FB-350
Structure
Voltage
Power
Switch
RPM(r/min)
Polyethylene Housing
220V - 240V , 50/60Hz
Cold Air-850W , Hot Air-3200W
Three-speed
Low-1200, Medium-1320, High-1420



PRECAUTIONS :
- Please read this instruction carefully before use.
- Check the power cable for possible damage. Ensure the power cable is in good condition.
- The machine can only plug into 16A socket. And never use extension cord.
- To avoid adverse consequences, only professional personnel of the Maintenance Department or similar can perform replacing or repair task if the power cable is damaged or the bower break down.
- Do not use the floor blower in the water. That will be very dangerous.
- Do not block the protective mesh cover to avoid motor overheating.
- Children are forbidden to use the blower. Keep children away from the running machine.
- Do not use the blower out of doors when its rains.
- Do not put any tools or other things into the blower when it is running.
- Do not use the blower under the conditions of inflammable and explosive. And do not use the blower in the air filled with chemicals.
- Cut off the power before cleaning or maintenance. Never clean of maintain the blower before it stopping working in case of electrical shock or injury.
- Protect the blower from water or moisture. Dry the blower out before use if water ingress or it get damp.

USING METHOD :
- Air cooling.

  1. Make sure there are no light and small objects in the working area or the cooling objects are heavy enough. Otherwise, the objects will be blew away or hurt people.
  2. Aim the air outlet at the cooling area to objects and turn on to the cold air switch (Hot air switch off) to cool. Regulate the wind speed according to demand.
- Air ventilating.
  1. Make sure there are no light and small objects in the working area.
  2. Uptilt the air outlet 45-90 degrees to aim it at the ventilator of the room and turn on the blower to circulate the air flow.
- Hot air drying.
  1.Make sure there are no inflammable and explosive objects, plastics or light and small objects on the floor or carpet.
  2.Put the blower on the corner of the floor or carpet and turn on the hot air switch. Then a hot air flow will be generated to dry the wet floor or carpet rapidly.
  3. If there are some objects under the carpet, take them out and dry separately.


PERFORMANCE FEATURES :
- With handy structure and graceful appearance.
- Mesh cover prevent debris into the motor.
- Double rear wheels and pitman style handle, easy to move.
- The big air-blast turbine can generate a large air flow. Allowing high efficiency.
- With high power heating wire, suitable for use in cold and damp areas, improve drying efficiency.
- Polyethylene housing protect internal components, safe and reliable, durable and long-lasting.
- Made of top quality material 3-speed air control to adjust the speed of wind, easy operation.
- Strong wind and low noise, wet or dry use. Suitable for use in hotels, workshops, factories and malls.



 Inquiry - RABBIT FLOOR BLOWER - FB-350